Homepage

MX-5 MK3 in pit compound at Silverstone Circuit
The tape marks the central bend point
The slider is activated by depressing the bar. It needed a bit of fettling to make it fit.
Rear three quarter shot of mk3 MX5 (NC)
The car
view of drivers seat from outside car
Drivers Seat & Harness Additions
Trough the door shot of MX5 (NC) cab
drivers door open
A mucky carpet where the seat used to be
Drivers Seat removed
View of seat base on runner
Underside of seat with runner attached
Bolt hidden in track of runner
Hidden under the runner
MX5 NC Seat Runner
Seat Runner
Postbox in the plastic are to allow Harness to attach of Harness Bar of Roll Bar
Roll Bar, Cobra Seats & TRS Harnesses
Hood Down And Looking Good. Harness, Roll Bar & Seats
View of TRS Jacks with helmet cable visible
Helmet Intercom Jacks
new Alignment bolt
Missing Brake Slider Replaced
Track rods replaced
Cracked upper wishbone
Work underway in wheel arch
Carnage with the seats removed
guts hanging out prior to new roll bar going in.

Welcome to mx5trackdayproject.co.uk. This is a hobby blog which documents my attempt to create a Grand Touring Track Day car for track days using a 2011 Mk3 MX5 (NC2.5) Hard Top.

Feel free to drop us a line with the contacts page.

Latest Post

Archive